CA20+
The CA+ series inherits the essence of Sonic CA for more than ten years, uses the core technology of high-efficiency dynamic intelligent power supply, and has a new generation of products, which has a qualitative leap. In 2023, the power is upgraded for CA+, entering the era of 3200W x2,4Ω continuous power output, the CA+ series embodies huge energy.Features
■ High-quality industrial frequency toroidal transformer power supply■ Efficient Class I™ power amplifier module
■ XLR input socket and SpeakON NL4 output socket
■ Three connection modes can be set (stereo/bridge/parallel)
■ Rear panel has input sensitivity selection (0.775V/1.0V/32dB)
■ There is a power circuit breaker on the rear panel
■ The front panel has independent channels, peak clipping warning, signal indicator, protection and power indicator
■ Scan the QR code on the back panel to permanently save the electronic manual, the information is accurate and easy to use
SPECIFICATIONS
Model | CA20+ |
---|---|
Output power: (AC 220v/50Hz. +/-10%. All channels driven output power, THD=1%) | |
8Ω Stereo | 2000W x2 |
4Ω Stereo | 3200W x2* |
2Ω Stereo | 4200W x2* |
8Ω Bridge | 6400W* |
4Ω Bridge | 7200W* |
Other specifications | |
Frequency Response | 20Hz-20kHz(+0/-0.5dB) |
THD+N | ≤0.1% |
S/N Rate | ≥80dB |
Input Sensitivity | 0.775V/1.0V/32dB |
Input Impedance (bal/unbal) | 20kΩ/10kΩ |
Voltage Gain | 44.2dB |
Output circuitry | Class I™ |
Cooling | Air flow from front to rear |
Connect | |
Input section | Balanced input XLR female socket/balanced parallel connection XLR male socket |
Output section | BINDING POST/SPEAKON |
Function | |
Front panel | Power indication/signal indication/peak shaving voltage limit indication/protection indication |
Front panel | Power switch/volume control knob |
Rear panel | Stereo/parallel/bridge selection switch, sensitivity selection switch, independent circuit breaker |
Dimension / Weight | |
Product Dimensions (mm)/th> | 483x497x133 |
Packaging Dimension (mm) | 620x585x210 |
Weight | 39.8kg |
The above packing dimensions, net weight, and gross weight are for reference only. The accurate values are subject to the identification on the batch of products. |
REMARK:
1、The power is tested under EIA standard.2、*, The power is tested under the condition of 40ms burst,1kHz sine wave and 1% THD.
3、**,The power is tested under the condition of 20ms burst,1kHz sine wave and 1% THD.
3、***,The power is tested under the condition of 10ms burst,1kHz sine wave and 1% THD.
4、SOUNDARD reserves the right to make any changes to the product specifications without prior notice.